Print version

Tanks for CHP-plants, NPGS and HPP

Description

Tanks and containers for CHP-plants, NPGS and HPP are designed to store process waters and chemicals used for chemical water treatment and other processes.

The Saratov Resevoir Plant produces three designs of the tanks:

General technical features of the tanks for CHP-plants, NPGS and HPP

Criteria Value
Volume, m3 1-1000
Design
  • rectangular
  • vertical cylindrical
  • horizontal cylindrical
Installing
  • indoors
  • outdoors (cylindrical only)
Processing medium density, t/m3 1.1
Medium temperature, ºС up to 100
Pressure, MPa 0.002
Negative pressure, MPa 0.00025
Heat insulation loading, MPa 0.00045
Climatic category NF 3
Material design
  • St2ps2 for operation up to -20ºС
  • VSt3sp5 for operation up to -30ºС
  • 14G2 for operation up to -30...-40ºС
  • 09G2S for operation up to -40...-50ºС
Seismic activity at the operational site up to 9 points

Tanks for CHP-plants, NPGS and HPP production

Tanks for CHP-plants, NPGS and HPP are manufactured on the basis of ОСТ 34-42-566-82 "Tanks and containers for CHP-plants, NPGS and HPP made of carbon steel up to 1000 m3. Technical specification".*

Due to severe operating conditions, the tank body is made of carbon, alloy or stainless steel with a thickness of 4-12 mm (for carbon and alloy) and 4-10 mm (for stainless). If anti-corrosion treatment of the inner surface is not applicable, the shell thickness is calculated with corrosion allowance at the rate of 1 mm for 10 years of operation.

If necessary, heat insulation is equipped with a design load of up to 0.00045 MPa.

Fittings and nozzles are disposed on the shell and the bottoms for processing medium supply and delivery, for processing equipment installation (safety valve, level gauge, level alarm, instrumentation and control equipment, etc.). The equipment configuration is designed in accordance with the customer's requirements.

As well as the tanks of large volumes may be provided with a ladder and maintenance platform.

When designing, the space between the liquid surface and the shell (As) is provided, which must necessarily remain unfilled. It is necessary to prevent hydrodynamic impact. There are also strict requirements for the perceived ccontour pressure of the bottoms on the foundation (qmax). (see table below)

Volume, m3 Interval As, mm Pressure qmax, t/m
up to 100 300 2.0
100 430 2.42
160 450 2.9
250 510 2.3
400 550 3.3
630 600 4.3
1000 650 6.0

Rectangular tanks for CHP-plants, NPGS and HPP

Rectangular tanks are produced up to 2.5 m3 and are designed for indoor installation only.

Rectangular tanks scheme

Typical external dimensions

Effective volume, m3 Height H, mm Length L, mm Width B, mm Weight, kg
1.0 1300 1220 895 190
1.6 1320 1220 245
2.5 1355 2130 375

Vertical cylindrical tanks for CHP-plants, NPGS and HPP

This design is available in volumes up to 100 m3. Tanks with a volume of 63 m3 and 100 m3 may be installed outdoors, taking into account wind and snow loads.

Vertical cylindrical tanks for CHP-plants, NPGS and HPP

Typical external dimensions of vertical cylindrical tanks

Volume, m3 Drawing Inner diameter Din, mm Outer diameter Dout, mm Cylindrical section height Нcyl, mm Total height Н, mm Width В, mm Weight, kg
1.0 1 1050 1160 1500 1610 - 185
1.6 1950 2055 220
2.5 1670 1770 1500 1610 315
4.0 1950 2055 375
6.3 2 3000 3350 2070 770
10.0 2150 2250 2600 965
16.0 3000 3100 2400 2730 3500 1250
25.0 3750 4090 1550
40.0 3800 3900 4260 2100
63.0 6000 6340 2750

Horizontal cylindrical tanks for CHP-plants, NPGS and HPP

Horizontal tanks are manufactured with a volume of 2-100 m3 with the possibility of outdoor installation, taking into account the wind load.

Tanks up to 75 m3 inclusive may be used as deaerator vessel and operated under pressure up to 0.02 MPa.

Horizontal cylindrical tank scheme

Typical external dimensions of horizontal cylindrical tanks

Volume, m3 Inner diameter Din, mm Cylindrical section length Lcyl, mm Total length L, mm Hight H, mm Shell thickness Sshell, mm Bottom thickness Sbot, mm Weight, kg
2 1200 2000 2390 1700 6 8 930
4 3500 3890 1200
8 1600 4000 4415 2250 8 2400
15 2000 4800 5365 2670 10 3450
25 2200 6580 7220 2860 4650
50 3000 7200 8150 3680 10 12 10050
75 10600 11500 12 12970

We produce Tanks for CHP-plants, NPGS and HPP both on standard design, and per individual enquiry.

How to order a tank for CHP-plants, NPGS and HPP at the Saratov Reservoir Plant?

In order to buy a tank, You may:

  • contact the Sales Department +7(8452)250-288
  • send us technical specifications at
  • use the "Request for quotation" form, provide contact information, and our specialist will contact you

* lifetime of the OST is finished but not cancelled

 

See also:

Rectangular tanksSilos for granular materialsSilos for liquids
Silos for bulk materialsSurge tanksNon-pressure tanks
Pressure tanksHot wellsTanks for CHP-plants, NPGS and HPP
Stainless steel tanks